Buying a home can be one of your most significant investments in life. Not only are you choosing your dwelling place, and the place in which you will bring up your family, you are most likely investing a large portion of your assets into this venture. The more prepared you are at the outset, the less overwhelming and chaotic the buying process will be. The goal of this page is to provide you with detailed information to assist you in making an intelligent and informed decision. Remember, if you have any questions about the process, we're only a phone call or email away!
Inspections are designed to help you understand the overall condition of a property, potentially saving you considerable time with the purchase process and hundreds or thousands of dollars in repairs. Some of the inspections which may be required or recommended by your real estate professional are:
Radon levels are detected and measured. The Environmental Protection Agency (EPA) estimates that between 15,000 - 22,000 deaths per year result from radon exposure, therefore they recommend that all homes be tested for radon. EPA recommends that homes containing 4.0 or more Pico Curies per liter be remedied.
A termite inspector will inspect the property for the presence of wood-destroying insects (WDI) or wood destroying organisms (WDO, i.e. fungus) and conducive conditions that exist. Inspection requirements vary by state.
Lab analysis will determine if asbestos fibers are present and evaluate their condition. If friable or non-friable conditions exist, buyers should seek professional assistance.
The condition of the siding and any areas of high moisture are evaluated during this inspection. Typically, composition board siding is a paper-based product that is manufactured to replicate traditional wood siding at a fraction of the cost. Homeowners recently brought class action lawsuits against some of the larger manufacturers of this type of product. The homeowners claimed that the siding was susceptible to water penetration, which caused premature deterioration and rotting. According to the Environmental Protection Agency, some of the most commonly known manufacturers of composition board siding are Louisiana Pacific (LP), Georgia Pacific (GP), Masonite, and Weyerhaeuser.
Painted surfaces of a home can be evaluated to determine the presence of lead paint. Homes that were constructed before 1978 may contain lead-based paint. Lead exposure can be harmful to young children and babies. Children with lead in their bodies can suffer from damage to the brain and nervous system, behavior and learning problems, slowed growth, hearing problems, and headaches.
Determines the overall condition and operability of a pool and/or hot tub's equipment. Additionally, the condition of the pool deck will be inspected for deterioration and/or other noticeable defects.
There are two types of stucco siding to be aware of: cement-based "traditional" stucco and synthetic stucco. An inspection of the siding's application according to manufacturer's installation specifications is recommended. Synthetic stucco siding is commonly referred to as Exterior Insulated Finish System (EIFS).
* Obtaining the proper inspections for a home prior to purchase is one of the best ways to make a smart purchase decision and protect your investment. The above is not meant to be an exhaustive list of all of the types of inspections that may be necessary on a particular home, but it is meant to provide general information on some of the most common types of inspections.
As you start shopping for a home loan, your first question of each lender will probably be "What's your interest rate? How much are you charging?" Interest rates are usually expressed as an annual percentage of the amount borrowed. If you borrowed $120,000 at 10% interest, you'd owe interest of $12,000 for the first year. With most mortgage plans you'd pay it at the rate of $1,000 a month. You would also send in something each month to reduce the principal debt you owe - and the next month you'd owe a bit less interest.